Eco Beton Evercrete Vetrofluid® Deep-Penetrating Concrete Sealer & Waterproofing
Permanent Liquid Waterproofing & Structural Concrete Hardener
Permanently seal, strengthen, and protect concrete structures with Eco Beton Evercrete Vetrofluid® Deep-Penetrating Concrete Sealer & Waterproofing. Applied as a sprayable liquid, Evercrete Vetrofluid® migrates deep into the concrete micropores to form an internal crystalline barrier. This process increases cortical compressive strength by 30% while turning porous concrete into an impermeable, anti-carbonation, and acid-resistant structure.
Engineered to withstand extreme negative hydrostatic pressure up to 1 MPa (~10 atm) and over 300 freeze-thaw cycles, Evercrete Vetrofluid® protects critical civil infrastructure, drinking water tanks, foundations, and parking decks against de-icing salts and chemical degradation. Its non-toxic, solvent-free formula carries EPD and LEED certifications, making it safe for direct contact with potable water and food products.
Key Benefits of EcoBeton Evercrete Vetrofluid®
-
Permanent Deep Waterproofing: Penetrates into the concrete matrix to permanently block micropores, reducing water absorption under pressure by 70%.
-
Boosts Concrete Compressive Strength: Increases surface cortical compressive strength by 30% for superior load-bearing capacity and abrasion resistance.
-
Extreme Negative Pressure Defense: Withstands counter-thrust and negative hydrostatic pressure up to 1 MPa (~10 atm), making it ideal for basements and sub-grade structures.
-
Potable Water & Food Contact Certified: Non-toxic, zero-VOC, solvent-free composition certified for drinking water reservoirs and food processing facilities.
-
300+ Freeze-Thaw Cycles Resistance: Protects structural concrete from de-icing salts, carbonation, micro-cracking, and mild chemical attacks.
Technical Specifications
| Feature | Specification |
| Product Type | Deep-penetrating liquid concrete sealer & waterproofer |
| Coverage (Waterproofing) | Approx. 2.5 m²/kg (2 coats) |
| Coverage (Consolidation) | Approx. 4.3 m²/kg |
| Negative Hydrostatic Resistance | Up to 1 MPa (~10 atm) |
| Certifications | Potable Water / Food Safe, EPD, LEED Compliant, Zero VOCs |
| Application Tool | Low-pressure spray pump, brush, or short-nap roller |
| Usage Environment | Drinking water tanks, tunnels, bridge decks, basements, foundations |
💡 Pro Tip: Thoroughly clean and pre-saturate the concrete substrate with water 24 hours prior to treatment. Spray Evercrete Vetrofluid® evenly in wet-on-wet coats until full saturation is achieved. Keep the surface moist during application to ensure the liquid catalyst penetrates to maximum depth within the concrete pores.
